Automatic Glass Bottle Plastic Screw Cap Capping Machine With Cap
Sorting
Glass bottle capping machine is a new type of capping machine
developed by our company in recent years to meet the needs of our
customers. It is widely used in pharmacy, food, science education
and other fields. This machine has the characteristics of overload
protection device, torque adjustment mechanism, etc. it selects
high-quality electronic watch machine at home and abroad as the
driving element. It has the advantages of safe and reliable
operation, long service life, simple maintenance, simple operation,
high efficiency, superior performance, light structure, wide
application, and quickly wins the trust of the majority of
customers.
Operation method
1. Put the bottle filled with materials and put the lid on the
lower tray. The operator holds the bottle with one hand and the
handle is tightened down by the other hand. At this time, the
capping head is pressed against the tray until the bottle cap and
the capping head are pressed.
2. When the cap and the cap are pressed, the cap is tightly rolled
after several turns of the rotating head of the cap rolling tool.
3. Return the handle to the original position, and return the cover
head to the original position, so that the cover of the rolled cap
will return to the original position with the tray. The whole
operation process is completed. Repeat the above operation for each
bottle cap rolling later.
4. Press the start switch on the lower cover machine with the right
index finger and press down until the clutch of the cover spinner
is self-contained
When the sound of "Da Da..." is released, the screw head does not
have to be pressed too tightly according to the tightening of the
screw cover;
5. The adjustment of the cap tightness can be achieved by adjusting
the torque adjustment nut between the screw head and the spinner.
The greater the torque distance is when the screw is adjusted, the
tighter the cap is, the smaller the torque distance is for the nut
to be loosened, and the looser the cap is.
Matters needing attention
1. It is forbidden to use this machine in flammable gas
environment.
2. The machine can not be stored in humid, corrosive gas and high
dust environment.
3. It is not allowed to change the direction of rotation in use, so
as to avoid damaging the motor and shortening the service life.
Quick Detail:
automatic capping machine with cap soting system
1. Full Automatic screw capping machine
2. easy change over for different bottle size
3. pick and place technology
4. over-load protection system
Description:
This automatic high speed bottle capping machine is developed on
the basis of advinced technology. The structure is compact and the
production is stable. The machine has the function of
overload-protection and the bottle and machine will not be broken
even if the wrong operation. The capping speed can be adjusted to
control the production capacity.
The cap unscrambling system adopts crawler-type elevating method,
it arrange caps according to the cap center of gravity, no fault
cap output and no cap damage,A slideway connect the cap unscrambler
and the capping machine, and it equipped with 1 sensors on the
slideway, if there is no caps feed to capping machine, the sensor
will send information to PLC, the machine will stop and alarming.
Applications:
This automatic bottle capping machine bottle tightener is used for
plastic lid screw capping process.
it Suitable for PET bottles and glass bottles.
Specifications:
| Model | ZGF-1 |
| Applied bottle range | 50-2000ml |
| Applied cap size | 12-70mm |
| rejects of capping | ≤0.3% |
| Power Supply | 3800V 50HZ |
| Power Consumption | 300W |
| Pressure | 0.4-0.6Mpa |
| Speed Control | Frequency Convertion |
| Single machine noise | <=70Db |
| Weight | About 950kg |
| Dimension(LxWxH) | 1200x1000x1800(mm) |
| Production Capacity | 30-40 bottles/minute |
Competitive Advantage:
Carbon steel base mounted on adjustable floor levellers for easy
alignment
Bearing frame and all surface components manufactured in SUS 304
stainless steel
Manual height adjustment via column
Manual and independent speed variation ,
Caps in chute photocell, machine will not work if there are no caps
present on chute
Magnetic clutch capping head for screw caps
Stainless steel electrical control panel with 24 volt auxiliary
commands
Equipped with Omron material on control panel
Automatic cap feeder, chute and applicating head
Safety guarding with interlock devices,Overload protection system
plastic or aluminium screw cap
With screw bottle feeding system
Alarm warning light and acoustics
the capping machine with Photoelectricity sensor system .
the machine with automatic cap unscrambler system
